QuantaMesh T7032-IX7D

Products\ QCT Switches

The Next Wave 100G Ethernet Switch for Data Center and Cloud Computing

  • 32 x 40/100GbE QSFP28
  • VXLAN
  • Multi-Chassis Link Aggregation (MLAG)
  • OSPF, BGP4 with ECMP
  • Network Automation

Next Wave 100G Ethernet Switch for Data Center and Cloud

QCT T7032-IX7D is a high-performance and low latency layer 3 managed switches deployed as the Data Center Leaf Switch to connect to 100G servers or deployed as Data Center Spine Switch to aggregate 100G connections from Leaf Switches to expend the network scalability. T7032-IX7D supports 32 QSFP28, each supporting 1 x 100GbE or 1 x 40GbE, or via breakout cables, 2 x 50GbE, 4 x 25GbE, or 4 x 10GbE. It equipped with BMC in a 1-Rack-Unit (1RU) switch and supports 3.2 Terabits per second (Tbps) of bandwidth. By levering merchant silicon chip, T7032-IX7D is a high performance and high density Ethernet switch with advanced features such as smart table, dynamic load balancing, and VxLAN/RIOT support. T7032-IX7D also support larger tables size, improves the performance for larger packet buffers and reduced the latency. With QNOS (Quanta Network OS) supported, T7032-IX7D is the best fit for Data Center application.

KEY FEATURES

  • Multi-chassis Link Aggregation (MLAG)

  • Virtual Router Redundancy Protocol (VRRP) and BidirectionalForwarding Detection (BFD)

  • In-Service Software Upgrade (ISSU)

  • Up to 48 paths ECMP routing for load balancing and redundancy

  • Spanning Tree with Guarding Features

Specifications

Physical ports

Port configuration
32 40/100GbE QSFP28 ports
Management Port
Out-of-band management port (RJ-45, 10/100/1000BASE-T)
Console Port
1 RJ-45 console port
USB
1 USB 2.0 port

Performance

Switching capacity
6.4Tbps
Maximum forwarding rate
3.3Bpps
Latency
Ultra-low latency

Major Components

ASIC
Broadcom TD3 56870
CPU
Intel Atom Denverton, TPM 2.0
Memory
8GB DDR4 with ECC
Storage
128GB M.2 SATA for storage

Mechanical

Dimension (HxWxD)
44 x 440 x 508mm
Weight
9.33kg/20.55lbs (NET)

 

Power

PSU
100~240VAC, 50/60Hz, 750W*2 (1+1)
Power consumption
Idle Mode: 217W
Normal Mode: 293W

Layer 2 Features

Switching Mode
Store-and-Forward
Spanning Tree
802.1w
802.1s
Auto Edge
VLAN
IEEE 802.1Q Tagged Base
Port-based
QinQ (802.1ad)
Storm Control
Broadcast
Unknown Multicast
DLF (Unknown Unicast)
IGMP Snooping
v1/v2/v3
v1/v2 Querier
Immediate Leave
MLD Snooping v1/v2
 
Link Aggregation
Dynamic Load Balancing (DLB)
802.3ad with LACP
Static Trunk
Unicast/Multicast Traffic Balance over Trunking Port
LACP Fallback

Layer 3 Features

Static route
IPv4 IPv6
ECMP
Dynamic Load Balancing (DLB)

Other Features

Priority-based Flow Control (802.1Qbb)
802.1p
IP-DSCP
DCBX
DCBX for ETS DCBX for PFC PCBX for Application Priority
Multi-Chassis Link Aggregation (MLAG)
– IGMPv1/v2/v3 SNP and MLDv1/v2 SNP – Standalone mode – L2/L3 unicast – RSTP/MSTP – VXLAN

Ordering Information

T7032-IX7D (1IX7U7Z0002) Front to Back, with Rail Kit
T7032-IX7D (1IX7U7Z0003) Back to Front, with Rail Kit